PAINTING WALLS - PAINT ROLLER IDEAS & TECHNIQUES

June 8, 2018 by

The paint roller is our best friend when it comes to painting walls. Able to apply paint very quickly and uniformly, we owe lots of gratitude to the friend the paint roller. Obtainable in a multitude of sizes and in many different various materials generally if something should be painted there is a roller that can perform the job. This information will talk over some basic tips i don’t find about usually.

First a shorter explanation of the terminology. ‘Paint cage’ this is the tool which you put the actual roller sleeve on. The tube bit that applies the paint is known as a ‘sleeve’ or ‘roller sleeve’ etc. Sometimes I’ve used ‘roller’ or ‘paint roller’ to spell out the cage and the sleeve together.

Loading your roller properly is an important step, how much paint you’ll want in your roller depends on the surface you are painting as well as what kind of roller sleeve you may have but generally the motion is similar. You need to roll the roller around the pan before the just the roller sleeve touches the paint, allow it to go get saturated as it were before lifting your paint roller up, moving it towards the top of the pan and rolling it back down into the paint. Doing this several times will bunch the paint tray too and super saturate your roller, you generally would like paint roller to be the verge of over-saturation as this allows a frequent thickness of paint in addition to full paint coverage on your wall. You’ll want to try not to smother the complete roller in paint, you simply require it on the sleeve so keep it there.



When you have some paint around the roller and also on the tray loading your roller, it is very simple and easy , doesn’t require a lot of time inside the pan. A simple dab of paint about the roller from the pan, lift it to the top, roll it down twice and you’re usually prepared to carry on painting.

When utilizing the paint for the wall the best way is to use long motions going from your the top wall to the bottom with the wall doing work in areas 2 to 4 feet wide for that tall your wall is and your roller sleeves paint holding capacity. This spreads the paint consistently and provide the very best finish.

Once you’ve got your paint roller full of paint, you need to start painting. With all the paint roller you want to apply ample pressure to have the paint onto the wall, in many instances and unless you’re painting an extremely rough surface like old brick there really should not be any should overly press or force the roller in to the wall this could be more work than necessary and may leave unsightly roller marks. Start close to the middle of the wall, roll the roller in the wall to the top level then return into the base of the wall re-rolling over the area that you started. You now must have something such as a big straight patch on the wall, in your retract you want to relocate either direction right of left , nor ensure it is past an acceptable limit off, you want portion of your roller to still live in the previous section of paint you applied. Continuing your journey back off you carry on and move around in the direction and today your rolling motion starts to battle the design of your very large V or W. Make sure you return via your original section of paint to spread the paint from the wall and present it a frequent thickness. For optimal results, once you have spread the paint on top of the wall, finish your repair by gently rolling downwards on the entire area you’ve painted, this gives a regular finish.

To learn more about paint roller please visit resource: read.